IHI logoIHI logo 2

IHI Connectors®

(AKA International Hydraulics Inc)

7700 St. Clair Avenue
Mentor, Ohio 44060

Ph 440-951-7186 Fax 440-951-1071

search engine by freefind

84JM
ISO 9001:2008

 

All cart purchases are made through Lugsdirect.com. Enquiries should be directed to sales@lugsdirect.com or call 330-562-8983

Call Chas Ridley at 440-951-7186 ext 103
for help with your particular application selection 
or email Cridley@IHInet.com.

 

Before purchasing any SMT connectors please read these important precautions and limitations:

 

FAQ and safeguards for SMT High Current Applications

 

Surface Mount Technology FAQ

 

Click here for THT PCBs

Tip: Parts listed in order of incr/easing Wire Size


Search by AMPs

 

30A | 65A | 85A | 115A/85A | 115A

 

Over 115A use THT Mount or Dual RLM crimp lugs

 

Search By Wire Size

 

12 AWG | 10 AWG | 6 AWG | 2 Wire 4 AWG | 4 AWG | 2 AWG

 

Over 2 AWG useTHT Mount


CLICK HERE TO RETURN TO MAIN PAGE FOR PCB SOLDERABLE TERMINAL LUGS

 

Part Number
& Image
(Click for larger view)
Description and Information Pricing and
Purchasing
 
Part No.

12 AWG High AMP PCB Wire Lug 12-16* AWG

Purchase
B12-NM-SMT-RLM

12 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 12-16*

(5.261-1.31mm2)

30A

SIDE /
SIDE
Phillips Screw

SMT Solderable Surface Mount

B12-NM-SMT-RLM-KIT, 12AWG - 16AWG High AMP PCB wire lug

Ring lug not included

rlm with 2 wrenches
When tightening bolt,
two wrenches should be used to avoid damaging smt bond

dimensions diagram

Dimensions

A: 0.31" (7.9mm)

B: 0.46" (11.7mm)

C: 0.26" (6.6mm)

See Mechanical Drawing for detailed dimensions

B12-NM-SMT-RLM-KIT: 12 AWG, 30 AMP at 75°C, ring lug mount with phillips screw and washer, Wire range depends on the wire range of the ring lug. Nickle/Tin plated aluminum. Can be used as a PCB spacer, riser, current shunt, and mounting block. Side wire, and side screw entrance. IHI® brand.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 1: Most Sturdy: Vertical screw and ring lug mount. Not intended for side wire use without use of busbar.

Figure 2: Less Sturdy: Horizontal screw and horizontal ring lug mount. Best for factory wiring only.

In Figure 2 orientation, when using a headed screw or ring lug and bolt it's recommended that the head of the screw hangs off the edge of the board. Screws with little or no clearance between the head of the screw and the board can result in mechanical and electrical fouling.

 

*Wire range depends on the wire range of the ring lug

 

B12-NM-SMT-RLM as support block, heat sink, casemount

Click here to view instructions for use as a mechanical support block.

For More Information Click the Icons Below
click for PDF document


click for PDF document
NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

Mechanical PCB Support Block

Purchase
B12-NM-SMT-N66-KIT

12 AWG Lug

"B12-NM-SMT-N66-KIT" Mechanical PCB support block intended for use with B12-NM-SMT-RLM-KIT. Kit includes nickle/Tin plated aluminum B12 body and 10-32 x 1/2 Nylon 66 slotted set screw. Solderable surface mount design does not affect reverse side clearance, no board penetration. Remove screw before soldering. N66 screw will melt during soldering. Not intended for wire termination. View Soldering Temperature Profiles here. IHI Brand.

 

Intended for use with the B12-NM-SMT-RLM-KIT

 

B12-NM-SMT-N66 and  B12-NM-SMT-RLM mounting block application

Click here to view instructions for use as a mechanical support block.

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 1: Most Sturdy: Vertical screw.

Figure 2: Less Sturdy: Horizontal screw.

Please email for higher volume prices

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

B12-NM-SMT

dimensions diagram

Dimensions

A: 0.31" (7.9mm)

B: 0.46" (11.7mm)

C: 0.26" (6.6mm)

See Mechanical Drawing for detailed dimensions

For More Information Click the Icons Below
click for PDF document
click for PDF document
NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No. Multi-Purpose Wire Tie Mount, Shunt, and PCB Support Block Purchase Options

B12-NM-SMT

 

"B12-NM-SMT" Multi-purpose wire tie mount, shunt, and PCB support block. Nickle/Tin plated aluminum. Can be used as an SMT tie down, current shunt, heat sink, or SMT spacer. 30 AMPs at 75°C heat rating. Solderable surface mount design does not affect reverse side clearance, no board penetration. IHI Brand.

 

B12-NM-SMT orientations

Figure 1: Most Sturdy: Vertical screw and horizontal wire.

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

In Figure 2 orientation, when using a headed screw or ring lug and bolt it's recommended that the head of the screw hangs off the edge of the board. Screws with little or no clearance between the head of the screw and the board can result in mechanical and electrical fouling.

 

Please email for higher volume prices


 

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

B12-NM-SMT

dimensions diagram

Dimensions

A: 0.31" (7.9mm)

B: 0.46" (11.7mm)

C: 0.26" (6.6mm)

See Mechanical Drawing for detailed dimensions

For More Information Click the Icons Below
click for PDF document
NO UL, UR  

RoHS 10/10

 
Return to Top
Part No.

10 AWG High AMP PCB Wire Lug 10-16 AWG

Purchase
B10-PCB

10 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 10-16*

(4-1.5mm2)

30A

(75°C)

SIDE /
SIDE
.047" Slotted
Screw

SMT Solderable Surface Mount

B10-PCB, 10AWG - 16AWG, THT PCB WIRE TERMINAL

dimensions diagram

Dimensions

A: 0.34" (8.6mm)

B: 0.49" (12.4mm)

C: 0.26" (6.6mm)

D: 0.39" (9.9mm)

See Mechanical Drawing for detailed dimensions

B10-PCB: 10 AWG PCB wire lug, 10-16* AWG, 30 AMP, slotted head screw. Side wire, and side screw entrance.

*16 AWG, or fine stranded wires recommend to use wire ferrules.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.  

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.

In Figure 2 and 3 orientation, when using a headed screw or ring lug and bolt it's recommended that the head of the screw hangs off the edge of the board. Screws with little or no clearance between the head of the screw and the board can result in mechanical and electrical fouling.

 

When the screw is over the PCB surface, it's recommended that the B10-PCB-HEX is used instead of the B10-PCB

 

Zinc plated steel screw, and integrated aluminum foot, tin plated, solderable

For More Information Click the Icons Below
click for PDF document
click for PDF document


NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

10 AWG High AMP PCB Wire Lug 10-16 AWG

Purchase
B10-PCB-HEX

10 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 10-16*

(4-1.5mm2)

30A

(75°C)

SIDE /
SIDE
3/32" HEX Socket Screw

SMT Solderable Surface Mount

B10-PCB-HEX SCREW, 10 AWG - 16 AWG

dimensions diagram

Dimensions

A: 0.34" (8.6mm)

B: 0.49" (12.4mm)

C: 0.26" (6.6mm)

D: 0.39" (9.9mm)

See Mechanical Drawing for detailed dimensions

B10-PCB-HEX: 10 AWG PCB wire lug, 10-16* AWG, 30 AMP, Hex socket screw. Side wire, and side screw entrance.

*16 AWG, or fine stranded wires recommend to use wire ferrules.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.  

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.


Zinc plated steel screw, and integrated aluminum foot, tin plated, solderable

 

 

For More Information Click the Icons Below
click for PDF document
click for PDF document


NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

10 AWG High AMP PCB Wire Lug 10-16 AWG

Purchase
B10-PCB-RLM-KIT

10 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 10-16*

(4-1.5mm2)

30A

(75°C)

SIDE/
SIDE
Phillips Screw

SMT Solderable Surface Mount

B10-PCB-RLM, 10AWG - 16AWG High AMP PCB wire lug

rlm with 2 wrenches
When tightening bolt,
two wrenches should be used to avoid damaging smt bond

dimensions diagram

Dimensions

A: 0.34" (8.6mm)

B: 0.49" (12.4mm)

C: 0.26" (6.6mm)

D: 0.39" (9.9mm)

See Mechanical Drawing for detailed dimensions

B10-PCB-RLM-KIT: 10 AWG PCB wire lug, 10-16* AWG, 30 AMP, ring lug mount with phillips screw and washer. 1 leg at .336X.14” with a .10"(2.54mm) PCB penetration. Side wire, and top screw entrance.

*16 AWG or fine stranded wires recommend to use wire ferrules.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.  

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.

In Figure 2 and 3 orientation, when using a headed screw or ring lug and bolt it's recommended that the head of the screw hangs off the edge of the board. Screws with little or no clearance between the head of the screw and the board can result in mechanical and electrical fouling.


 

 

Zinc plated steel screw, and integrated aluminum foot, tin plated, solderable
For More Information Click the Icons Below
click for PDF document
click for PDF document


NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

10 AWG High AMP PCB Wire Lug 10-16 AWG

Purchase
B10-PCB-RLM-G-KIT

10 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

Ring Lug

AWG 10-16

(4-1.5mm2)

OR

Grounding Wire

#10 AWG

30A

(75°C)

SIDE/
TOP

Green

Phillips/Slotted Combo

SMT Solderable Surface Mount

B10-PCB-RLM-G-KIT-SMT-application

rlm with 2 wrenches
When tightening bolt,
two wrenches should be used to avoid damaging smt bond

dimensions diagram

Dimensions

A: 0.34" (8.6mm)

B: 0.49" (12.4mm)

C: 0.26" (6.6mm)

D: 0.39" (9.9mm)

See Mechanical Drawing for detailed dimensions

B10-PCB-RLM-G-KIT: 10 AWG PCB wire lug, 10-16 AWG - wire range depends on the wire range of the ring lug. 30 AMP, green phillips/slotted combo grounding screw, 1 leg at .336X.14” with a .10"(2.54mm) PCB penetration. Top screw entrance. For use with ring lug. Not intended for wire insertion except with bare, #10 AWG, solid grounding wire.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.  

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.

In Figure 2 and 3 orientation, when using a headed screw or ring lug and bolt it's recommended that the head of the screw hangs off the edge of the board. Screws with little or no clearance between the head of the screw and the board can result in mechanical and electrical fouling.

 


B10-PCB-RLM-G-KIT High AMP PCB wire lug 10 AWGB10-PCB-RLM-G-KIT green ground screw, 10 AWG grounding wire applicationB10-PCB-RLM-G-KIT high AMP PCB wire lug B10-PCB-RLM-G-KIT high AMP PCB wire lug

Surface Mount Application | #10 AWG Solid, Grounding Wire Application | Ring lug not included

Zinc plated steel screw, and integrated aluminum foot, tin plated, solderable
For More Information Click the Icons Below
click for PDF document
click for PDF document


NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

10 AWG High AMP PCB Wire Lug 10-16 AWG

Purchase
B10-PCB-NS

10 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 10-16*

(4-1.5mm2)

30A

(75°C)

SIDE /
TOP
N/A

1 LEG at .336X.14” (8.5X3.5mm)
0.10" 2.54mm PCB penetration

B10-PCB-NS, 10AWG - 16AWG, THT PCB WIRE TERMINAL

dimensions diagram

Dimensions

A: 0.34" (8.6mm)

B: 0.49" (12.4mm)

C: 0.26" (6.6mm)

D: 0.39" (9.9mm)

See Mechanical Drawing for detailed dimensions

B10-PCB-NS: 10 AWG, 30 AMP,10-16* AWG wire range. Sold less the wire binding screws so clients can provide their own #10-32 screw. 1 leg with a .336X.14” penetration. Side wire entrance, no screw. Integrated aluminum foot, tin plated bus.

*16 AWG or fine stranded wires recommend to use wire ferrules.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.  

 

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.

In Figure 2 and 3 orientation, when using a headed screw or ring lug and bolt it's recommended that the head of the screw hangs off the edge of the board. Screws with little or no clearance between the head of the screw and the board can result in mechanical and electrical fouling.

 

Integrated aluminum foot, tin plated, solderable.

For More Information Click the Icons Below
click for PDF document


NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

6 AWG High AMP PCB Wire Lug 6-16 AWG

Purchase
B6A-PCB

6 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 6-16*
(10-2.5mm2)

65A

(75°C)

SIDE /
SIDE
.045" Slotted Screw

SMT Solderable Surface Mount

B6A-PCB, 6 AWG - 14 AWG High AMP PCB wire lug

rlm with 2 wrenches
When tightening bolt,
two wrenches should be used to avoid damaging smt bond

dimensions diagram

Dimensions

A: 0.34" (8.6mm)

B: 0.52" (13.2mm)

C: 0.34" (8.6mm)

D: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B6A-PCB: 6 AWG PCB wire lug, 6-16* AWG, 65 AMP, slotted set screw. Side wire, and side screw entrance.

*16 AWG or fine stranded wires recommend to use wire ferrules.

 

Due to peel off torque limitations, wire size and torque may be limited to 8 AWG maximum.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.  

 

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.

 

Note 1: Due to peel off torque limitations, wire size and torque may be limited to 8 AWG maximum.

Zinc plated steel screw, and integrated aluminum foot, tin plated, solderable

 

For More Information Click the Icons Below
click for PDF document
click for PDF document


NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

6 AWG High AMP PCB Wire Lug 6-16 AWG

Purchase
B6A-PCB-SS

6 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 6-16*
(10-2.5mm2

65A

(75°C)

SIDE /
SIDE
.039" Stainless Steel Screw

SMT Solderable Surface Mount

B6A-PCB-STAINLESS STEEL SCREW, 6AWG - 14 AWG High AMP PCB wire lug

rlm with 2 wrenches
When tightening bolt,
two wrenches should be used to avoid damaging smt bond

dimensions diagram

Dimensions

A: 0.34" (8.6mm)

B: 0.52" (13.2mm)

C: 0.34" (8.6mm)

D: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B6A-PCB-SS is End Of Life status with limited long term parts supply, see replacement part B6A-PCB with zinc plated steel screw.

 

Current stock 70,000 pcs (4/2024)

Lead time for 5k 2 weeks from PO for assembly

Lead time for large quantities 2 weeks plus 1 week per 10k pcs for assembly

 

B6A-PCB-SS: 6 AWG PCB wire lug, 6-16* AWG, 65 AMP, slotted set screw. Side wire, and side screw entrance.

*16 AWG, or fine stranded wires recommend to use wire ferrules.

 

Due to peel off torque limitations, wire size and torque may be limited to 8 AWG maximum.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.  

 

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.


Stainless steel screw, and integrated aluminum foot, tin plated, solderable
For More Information Click the Icons Below
click for PDF document
click for PDF document


NO UL, UR

RoHS 10/10

 
This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

6 AWG High AMP PCB Wire Lug 6-16 AWG

Purchase
B6A-PCB-HEX

6 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 6-16*
(10-2.5mm2

65A

(75°C)

SIDE /
SIDE
1/8" HEX Socket Screw

SMT Solderable Surface Mount

B6A-PCB-HEX SOCKET SCREW, 6AWG - 14AWG

rlm with 2 wrenches
When tightening bolt,
two wrenches should be used to avoid damaging smt bond

dimensions diagram

Dimensions

A: 0.34" (8.6mm)

B: 0.52" (13.2mm)

C: 0.34" (8.6mm)

D: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B6A-PCB-HEX: 6 AWG PCB wire lug, 6-16* AWG, 65 AMP, HEX socket set screw. 1 leg at .336X.14”with a .10" (2.54mm) PCB penetration. Side wire, and side screw entrance, 1/8” or (option) 3mm HEX socket set screw.

*16 AWG, or fine stranded wires recommend to use wire ferrules.

 

Due to peel off torque limitations, wire size and torque may be limited to 8 AWG maximum.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.  

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.

 

Zinc plated steel screw, and integrated aluminum foot, tin plated, solderable
For More Information Click the Icons Below
click for PDF document
click for PDF document


NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

6 AWG High AMP PCB Wire Lug 6-16 AWG

Purchase
B6A-PCB-HEX-M

6 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 6-16*
(10-2.5mm2

65A

(75°C)

SIDE /
SIDE
3mm Metric HEX Socket Screw

SMT Solderable Surface Mount

B6A-PCB-HEX-METRIC-SOCKET SCREW, 6AWG - 14AWG

rlm with 2 wrenches
When tightening bolt,
two wrenches should be used to avoid damaging smt bond

dimensions diagram

Dimensions

A: 0.34" (8.6mm)

B: 0.52" (13.2mm)

C: 0.34" (8.6mm)

D: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

 

 

B6A-PCB-HEX-M: 6 AWG PCB wire lug, 6-16* AWG, 65 AMP, Metric Hex socket set screw. 1 leg at .336X.14”with a .10" (2.54mm) PCB penetration. Side wire, and top screw entrance, 1/8” or (option) 3mm HEX socket set screw.

*16 AWG, or fine stranded wires recommend to use wire ferrules.

 

Due to peel off torque limitations, wire size and torque may be limited to 8 AWG maximum.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.  

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.

Zinc plated steel screw, and integrated aluminum foot, tin plated, solderable
For More Information Click the Icons Below
click for PDF document
click for PDF document


NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

6 AWG High AMP PCB Wire Lug 6-16 AWG

Purchase
B6A-PCB-RS

6 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 6-16*
(10-2.5mm2

65A

(75°C)

SIDE /
SIDE
#2 Slotted & Robertson Recess Head

SMT Solderable Surface Mount

B6A-PCB-ROBERTSON SCREW, 6AWG - 14AWG High AMP PCB wire lug

rlm with 2 wrenches
When tightening bolt,
two wrenches should be used to avoid damaging smt bond

dimensions diagram

Dimensions

A: 0.34" (8.6mm)

B: 0.52" (13.2mm)

C: 0.34" (8.6mm)

D: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B6A-PCB-RS: 6 AWG PCB wire lug, 6-16* AWG, 65 AMP, Slotted & Robertson Recess Head screw. Side wire, and side screw entrance.

*16 AWG or fine stranded wires recommend to use wire ferrules.

 

Due to peel off torque limitations, wire size and torque may be limited to 8 AWG maximum.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.  

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.

In Figure 2 and 3 orientation, when using a headed screw or ring lug and bolt it's recommended that the head of the screw hangs off the edge of the board. Screws with little or no clearance between the head of the screw and the board can result in mechanical and electrical fouling.


 

Zinc plated steel screw, and integrated aluminum foot, tin plated, solderable
For More Information Click the Icons Below
click for PDF document
click for PDF document


NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

6 AWG High AMP PCB Wire Lug 6-14 AWG

Purchase
B6A-PCB-RS-NS

6 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 6-14
(5.261-2.08mm2)

65A

(75°C)

SIIDE/

TOP

N/A

SMT Solderable Surface Mount

B6A-PCB-ROBERTSON SCREW, no screw, 6AWG - 14AWG High AMP PCB wire lug

rlm with 2 wrenches
When tightening bolt,
two wrenches should be used to avoid damaging smt bond

dimensions diagram

Dimensions

A: 0.34" (8.6mm)

B: 0.52" (13.2mm)

C: 0.34" (8.6mm)

D: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B6A-PCB-RS-NS: 6 AWG PCB wire lug, 6-14 AWG, 65 AMP, 1 leg at .336X.14” with a .10" (2.54mm) PCB penetration. Side wire and top screw entrance.

*16 AWG or fine stranded wires recommend to use wire ferrules.

 

Due to peel off torque limitations, wire size and torque may be limited to 8 AWG maximum.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.  

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.

In Figure 2 and 3 orientation, when using a headed screw or ring lug and bolt it's recommended that the head of the screw hangs off the edge of the board. Screws with little or no clearance between the head of the screw and the board can result in mechanical and electrical fouling.

 

For More Information Click the Icons Below
click for PDF document
click for PDF document


NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

6 AWG High AMP PCB Wire Lug 6-14 AWG

Purchase
B6A-NH-PCB-RS-NS

6 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

Ring Lug

AWG 6-14
(5.261-2.08mm2)

65A

(75°C)

TOP N/A

SMT Solderable Surface Mount

B6A-NH-PCB-RS-NS, 6 AWG, no hole, no screw, 6AWG - 14AWG High AMP PCB wire lug

rlm with 2 wrenches
When tightening bolt,
two wrenches should be used to avoid damaging smt bond

dimensions diagram

Dimensions

A: 0.34" (8.6mm)

B: 0.57" (14.5mm)

C: 0.34" (8.6mm)

D: 0.44" (11.2mm)

See Mechanical Drawing for detailed dimensions

B6A-NH-PCB-RS-NS: 6 AWG PCB wire lug, 6-14 AWG, 65 AMP, 1 leg at .336X.14” with a .13" (3.30mm) PCB penetration. Top screw entrance. To be used with a ring lug. Ring lug not included.

 

Due to peel off torque limitations, wire size and torque may be limited to 8 AWG maximum.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.  

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 3: Least Sturdy: Horizontal screw ring lug mounted wire. Best for factory wiring only.

In Figure 2 and 3 orientation, when using a headed screw or ring lug and bolt it's recommended that the head of the screw hangs off the edge of the board. Screws with little or no clearance between the head of the screw and the board can result in mechanical and electrical fouling.

 

For More Information Click the Icons Below
click for PDF document
click for PDF document


NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

6 AWG High AMP PCB Wire Lug 6-16 AWG

Purchase
B6A-PCB-RLM KIT

6 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 6-16*
(10-1.5mm2)

65A

(75°C)

TOP 7/16" Hex Cap screw 1/4"-28 UNF & Washer

1 LEG at .336X.14” (8.5X3.5mm)
0.10" 2.54mm PCB penetration

B6A-PCB-RING LUG MOUNT 6 AWG - 16AWG  High AMP PCB wire lug

Ring lug not included

Part not assembled

rlm with 2 wrenches
When tightening bolt,
two wrenches should be used to avoid damaging smt bond

dimensions diagram

Dimensions

A: 0.34" (8.6mm)

B: 0.52" (13.2mm)

C: 0.34" (8.6mm)

D: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B6A-PCB-RLM (KIT): 6 AWG PCB wire lug, 6-16* AWG, 65 AMP, Hex Cap screw, and washer (ring lug not included). 1 leg at .336X.14” with a .10" (2.54mm) PCB penetration. Side wire, and top screw entrance.

*16 AWG or fine stranded wires recommend to use wire ferrules.
Ring lugs not included. Part not assembled.

 

Due to peel off torque limitations, wire size and torque may be limited to 8 AWG maximum.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.  

integrated aluminum foot, tin plated, solderable

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.

In Figure 2 and 3 orientation, when using a headed screw or ring lug and bolt it's recommended that the head of the screw hangs off the edge of the board. Screws with little or no clearance between the head of the screw and the board can result in mechanical and electrical fouling.

 

 

 

B6A-PCB-RING LUG MOUNT 6 AWG - 16AWG  High AMP PCB wire lug

For More Information Click the Icons Below
click for PDF document


NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

6 AWG High AMP PCB Wire Lug 6-16 AWG

Purchase
B6A-PCB-2RLM KIT

6 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 6-16*
(10-1.5mm2)

65A

(75°C)

TOP 3/16" Hex Socket & Washer

1 LEG at .336X.14” (8.5X3.5mm)
0.10" 2.54mm PCB penetration

B6A-PCB-2-RING LUG MOUNT 6 AWG - 16AWG  High AMP PCB wire lug

Ring lugs not included

Part not assembled

rlm with 2 wrenches
When tightening bolt,
two wrenches should be used to avoid damaging smt bond

dimensions diagram

Dimensions

A: 0.34" (8.6mm)

B: 0.52" (13.2mm)

C: 0.34" (8.6mm)

D: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B6A-PCB-2RLM (KIT): 6 AWG PCB wire lug, 6-16* AWG, 65 AMP, Hex Cap screw, and washer (ring lugs not included) able to fit 2 ring lug mounts. 1 leg at .336X.14” with a .10" (2.54mm) PCB penetration. Side wire, and top screw entrance.

*16 AWG or fine stranded wires recommend to use wire ferrules.
Ring lugs not included. Part not assembled.

 

Due to peel off torque limitations, wire size and torque may be limited to 8 AWG maximum.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. View Soldering Temperature Profiles here. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. 

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.

In Figure 2 and 3 orientation, when using a headed screw or ring lug and bolt it's recommended that the head of the screw hangs off the edge of the board. Screws with little or no clearance between the head of the screw and the board can result in mechanical and electrical fouling.

 

 

Zinc plated steel screw, and integrated aluminum foot, tin plated, solderable

 

For More Information Click the Icons Below
click for PDF document


NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

6 AWG High AMP PCB Wire Lug 6-16 AWG

Purchase
B6A-PCB-45

6 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 6-16*
(10-2.5mm2)

65A

(75°C)

Optional Slotted
Screw

SMT Solderable Surface Mount

B6A-PCB-45, 6AWG -14AWG High AMP PCB wire lug

dimensions diagram

Dimensions

A: 0.53" (13.5mm)

B: 0.50" (12.7mm)

C: 0.34" (8.6mm)

See Mechanical Drawing for detailed dimensions

B6A-PCB-45: 6 AWG PCB wire lug, 6-16* AWG, 65 AMP, slotted screw, top wire, and screw entrance optional based on application position.

*16 AWG or fine stranded wires recommend to use wire ferrules.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.  

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 1: Most Sturdy: Vertical screw and horizontal wire.

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.

 

Zinc plated steel screw, and integrated aluminum foot, tin plated, solderable

 

B6A-PCB-45, 6AWG -14AWG High AMP PCB wire lugB6A-PCB-45, 6AWG -14AWG High AMP PCB wire lugB6A-PCB-45, 6AWG -14AWG High AMP PCB wire lugB6A-PCB-45, 6AWG -14AWG High AMP PCB wire lug

For More Information Click the Icons Below
click for PDF document
click for PDF document


NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

6 AWG High AMP PCB Wire Lug 6-16 AWG

Purchase
B6A-PCB-45-HEX

6 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 6-16*
(10-2.5mm2)

65A

(75°C)

Optional 1/8" HEX Socket Screw

SMT Solderable Surface Mount

B6A-PCB-45-HEX, 6AWG - 14AWG

dimensions diagram

Dimensions

A: 0.53" (13.5mm)

B: 0.50" (12.7mm)

C: 0.34" (8.6mm)

See Mechanical Drawing for detailed dimensions

B6A-PCB-45-HEX: 6 AWG PCB wire lug, 6-18* AWG, 65 AMP, slotted screw, top wire, and screw entrance optional based on application position.

*16 AWG or fine stranded wires recommend to use wire ferrules.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.  

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 1: Most Sturdy: Vertical screw and horizontal wire.

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.

 

Zinc plated steel screw, and integrated aluminum foot, tin plated, solderable.

 

B6A-PCB-45-HEX, 6AWG - 14AWGB6A-PCB-45-HEX, 6AWG - 14AWGB6A-PCB-45-HEX, 6AWG - 14AWGB6A-PCB-45-HEX, 6AWG - 14AWG

For More Information Click the Icons Below
click for PDF document
click for PDF document


NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

6 AWG High AMP PCB Wire Lug 6-16 AWG

Purchase
B6A-PCB-45-HEX-M

6 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 6-16*
(10-2.5mm2)

65A

(75°C)

Optional 3mm HEX Socket Screw

SMT Solderable Surface Mount

B6A-PCB-45-HEX, 6AWG - 14AWG

dimensions diagram

Dimensions

A: 0.53" (13.5mm)

B: 0.50" (12.7mm)

C: 0.34" (8.6mm)

See Mechanical Drawing for detailed dimensions

B6A-PCB-45-HEX-M: 6 AWG PCB wire lug, 6-18* AWG, 65 AMP, slotted screw, top wire, and screw entrance optional based on application position.

*16 AWG or fine stranded wires recommend to use wire ferrules.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.  

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 1: Most Sturdy: Vertical screw and horizontal wire.

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.

 

Zinc plated steel screw, and integrated aluminum foot, tin plated, solderable.

 

B6A-PCB-45-HEX, 6AWG - 14AWGB6A-PCB-45-HEX, 6AWG - 14AWGB6A-PCB-45-HEX, 6AWG - 14AWGB6A-PCB-45-HEX, 6AWG - 14AWG

For More Information Click the Icons Below
click for PDF document
click for PDF document


NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

6 AWG High AMP PCB Wire Lug 6-16 AWG

Purchase
B6A-PCB-45-RS

6 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 6-16*
(10-1.5mm2)

65A

(75°C)

Optional Slotted & Robertson Recess Head

SMT Solderable Surface Mount

B4A-PCB-45-RS, 6AWG - 16AWG

dimensions diagram

Dimensions

A: 0.53" (13.5mm)

B: 0.50" (12.7mm)

C: 0.34" (8.6mm)

See Mechanical Drawing for detailed dimensions

B6A-PCB-45-RS: 6 AWG PCB wire lug, 6-16* AWG, 65 AMP, slotted robertson recess screw, top wire, and screw entrance optional based on application position.

*16 AWG or fine stranded wires recommend to use wire ferrules.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.  

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 1: Most Sturdy: Vertical screw and horizontal wire.

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.

 

Zinc plated steel screw, and integrated aluminum foot, tin plated, solderable

 

B4A-PCB-45-RS, 6AWG - 16AWGB4A-PCB-45-RS, 6AWG - 16AWGB4A-PCB-45-RS, 6AWG - 16AWGB4A-PCB-45-RS, 6AWG - 16AWG

For More Information Click the Icons Below
click for PDF document
click for PDF document


NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

4 AWG High AMP PCB Wire Lug 4-14 AWG

Purchase
P4-SMT

4 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 4-14
(16-2.5mm2)

AL 65A

CU 85A

SIDE/TOP Slotted
Screw

SMT Solderable Surface Mount

P4, 4 AWG SPLICER REDUCER LUGS, 4AWG 14AWG

P4, 4 AWG SPLICER REDUCER LUGS, 4AWG 14AWG

P4, 4 AWG SPLICER REDUCER LUGS, 4AWG 14AWG

dimensions diagram

Dimensions

A: 0.34" (8.6mm)

B: 31/64" (12.3mm)

C: 1.01" (25.7mm)

See Mechanical Drawing for detailed dimensions

"P4-SMT" 4 AWG, 85 AMP, solderable, two wire, high current PCB terminal, splicer-reducer, looper wire lug, 4-14 AWG wire range, aluminum or copper wire, CU7AL, 75C temperature rating, built in wire stops, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application. IHI Connectors® brand. Made in the USA from domestic and imported parts.

 

One piece SMT / SMD Solderable Body Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

p4-smt orientation

Figure 1: Most Sturdy: Vertical screw and horizontal wire.

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

 

IEC grounding sybol

 

 

For More Information Click the Icons Below
click for PDF document


Rated Torque Label

UL Logo
UL CSA Certificate Link

RoHS 10/10

 
 
Return to Top
Part No.

4 AWG High AMP PCB Wire Lug 4-14 AWG

Purchase
B4A-PCB

4 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 4-14
(16-2.5mm2)

85A

(75°C)

SIDE /
SIDE
Slotted
Screw

SMT Solderable Surface Mount

B4A-PCB slotted SCREW, 4AWG - 14AWG High AMP PCB wire lug

dimensions diagram

Dimensions

A: 0.38" (9.7mm)

B: 0.62" (15.7mm)

C: 0.38" (9.7mm)

D: 0.49" (12.4mm)

See Mechanical Drawing for detailed dimensions

B4A-PCB: 4 AWG PCB wire lug, 4-14 AWG, 85 AMP, slotted screw. 1 leg at .375X.14”with a .13" (3.3mm) PCB penetration. Side wire, and side screw entrance, slotted screw. IHI Connectors® brand.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.  

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.

 

Zinc plated steel screw, and integrated aluminum foot, tin plated, solderable

 

For More Information Click the Icons Below
click for PDF document
click for PDF document


NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

4 AWG High AMP PCB Wire Lug 4-14 AWG

Purchase
B4A-PCB-HEX

4 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 4-14
(16-2.5mm2)

85A

(75°C)

SIDE /
SIDE
1/8" HEX Socket Screw

SMT Solderable Surface Mount

B4A-PCB-HEX SOCKET SCREW, 4AWG - 14AWG High AMP PCB wire lug

dimensions diagram

Dimensions

A: 0.38" (9.7mm)

B: 0.62" (15.7mm)

C: 0.38" (9.7mm)

D: 0.49" (12.4mm)

See Mechanical Drawing for detailed dimensions

B4A-PCB-HEX: 4 AWG PCB wire lug, 4-14 AWG, 85 AMP, HEX socket set screw. 1 leg at .375X.14”with a .13" (3.3mm) PCB penetration. Side wire, and side screw entrance, 1/8” HEX socket set screw. IHI Connectors® brand.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.  

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.

 

Zinc plated steel screw, and integrated aluminum foot, tin plated, solderable

 

For More Information Click the Icons Below
click for PDF document
click for PDF document


NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

4 AWG High AMP PCB Wire Lug 4-14 AWG

Purchase
B4A-PCB-HEX-M

4 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 4-14
(16-2.5mm2)

85A

(75°C)

SIDE /
SIDE
3mm HEX Socket Screw

SMT Solderable Surface Mount

B4A-PCB-HEX-M Metric hex SOCKET SCREW, 4AWG - 14AWG High AMP PCB wire lug

dimensions diagram

Dimensions

A: 0.38" (9.7mm)

B: 0.62" (15.7mm)

C: 0.38" (9.7mm)

D: 0.49" (12.4mm)

See Mechanical Drawing for detailed dimensions

B4A-PCB-HEX-M: 4 AWG PCB wire lug, 4-14 AWG, 85 AMP, Metric HEX socket set screw. 1 leg at .375X.14”with a .13" (3.3mm) PCB penetration. Side wire, and side screw entrance, 3mm HEX socket set screw. IHI Connectors® brand.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.  

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.

 

Zinc plated steel screw, and integrated aluminum foot, tin plated, solderable

 

For More Information Click the Icons Below
click for PDF document
click for PDF document


NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

4 AWG High AMP PCB Wire Lug 4-14 AWG

Purchase
B4A-PCB-RS

4 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 4-14
(16-2.5mm2)

85A

(75°C)

SIDE /
SIDE
Slotted & Robertson Recess Head

SMT Solderable Surface Mount

B4A-PCB-RS slotted and robertson recess head screw, 4AWG - 14AWG High AMP PCB wire lug

dimensions diagram

Dimensions

A: 0.38" (9.7mm)

B: 0.62" (15.7mm)

C: 0.38" (9.7mm)

D: 0.49" (12.4mm)

See Mechanical Drawing for detailed dimensions

B4A-PCB-RS: 4 AWG PCB wire lug, 4-14 AWG, 85 AMP, slotted robertson recess head screw. 1 leg at .375X.14” with a .13" (3.3mm) PCB penetration. Side wire, and side screw entrance, slotted robertson recess head screw. International Hydraulics Inc® brand.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.  

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.

In Figure 2 and 3 orientation, when using a headed screw or ring lug and bolt it's recommended that the head of the screw hangs off the edge of the board. Screws with little or no clearance between the head of the screw and the board can result in mechanical and electrical fouling.

 

Zinc plated steel screw, and integrated aluminum foot, tin plated, solderable

 

For More Information Click the Icons Below
click for PDF document
click for PDF document


NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

4 AWG High AMP PCB Wire Lug 4-14 AWG

Purchase
B4A-PCB-RLM-KIT

4 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 4-14
(16-2.5mm2)

85A

(75°C)

SIDE /
TOP
7/16" Hex Cap screw 1/4"-28 UNF & Washer

SMT Solderable Surface Mount

B4A-PCB-RLM no screw, 4AWG - 14AWG High AMP PCB wire lug

rlm with 2 wrenches
When tightening bolt,
two wrenches should be used to avoid damaging smt bond

dimensions diagram

Dimensions

A: 0.38" (9.7mm)

B: 0.62" (15.7mm)

C: 0.38" (9.7mm)

D: 0.49" (12.4mm)

See Mechanical Drawing for detailed dimensions

B4A-PCB-RLM-KIT: 4 AWG PCB wire lug, 4-14 AWG, 85 AMP, Hex Cap screw, and washer (ring lug not included). 1 leg at .375X.14” with a .13" (3.3mm) PCB penetration. Side wire, and side screw entrance, hex cap screw and washer. IHI Connectors® brand.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.  

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.

In Figure 2 and 3 orientation, when using a headed screw or ring lug and bolt it's recommended that the head of the screw hangs off the edge of the board. Screws with little or no clearance between the head of the screw and the board can result in mechanical and electrical fouling.

 

Zinc plated steel screw, and integrated aluminum foot, tin plated, solderable

 

For More Information Click the Icons Below
click for PDF document
click for PDF document


NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

4 AWG High AMP PCB Wire Lug 4-14 AWG

Purchase
B4A-PCB-2RLM-KIT

4 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 4-14
(16-2.5mm2)

85A

(75°C)

SIDE /
SIDE
3/16" HexSocket & Washer

SMT Solderable Surface Mount

B4A-PCB-2RLM no screw, 4AWG - 14AWG High AMP PCB wire lug

B4A-PCB-2RLM two ring lugs

Ring Lugs not included.

rlm with 2 wrenches
When tightening bolt,
two wrenches should be used to avoid damaging smt bond

dimensions diagram

Dimensions

A: 0.38" (9.7mm)

B: 0.62" (15.7mm)

C: 0.38" (9.7mm)

D: 0.49" (12.4mm)

See Mechanical Drawing for detailed dimensions

B4A-PCB-2RLM-KIT: 4 AWG PCB wire lug, 4-14 AWG, 85 AMP, Hex Socket Cap screw, and washer (ring lugs not included) able to fit 2 ring lug mounts. (ring lug not included). 1 leg at .375X.14” with a .13" (3.3mm) PCB penetration. Side wire, and side screw entrance. IHI Connectors® brand.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.

In Figure 2 and 3 orientation, when using a headed screw or ring lug and bolt it's recommended that the head of the screw hangs off the edge of the board. Screws with little or no clearance between the head of the screw and the board can result in mechanical and electrical fouling.

 

Integrated aluminum foot, tin plated, solderable

 

 

For More Information Click the Icons Below
click for PDF document


click for PDF document
NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

4 AWG High AMP PCB Wire Lug 4-14 AWG

Purchase
B4A-PCB-NS

4 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 4-14
(16-2.5mm2)

85A

(75°C)

SIDE /
SIDE
N/A

SMT Solderable Surface Mount

B4A-PCB-NS no screw, 4AWG - 14AWG High AMP PCB wire lug

dimensions diagram

Dimensions

A: 0.38" (9.7mm)

B: 0.62" (15.7mm)

C: 0.38" (9.7mm)

D: 0.49" (12.4mm)

See Mechanical Drawing for detailed dimensions

B4A-PCB-NS: 4 AWG PCB wire lug, 4-14 AWG, 85 AMP, no screw. 1 leg at .375X.14” with a .13" (3.3mm) PCB penetration. Side wire, and side screw entrance, no screw. IHI Connectors® brand.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.  

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.

In Figure 2 and 3 orientation, when using a headed screw or ring lug and bolt it's recommended that the head of the screw hangs off the edge of the board. Screws with little or no clearance between the head of the screw and the board can result in mechanical and electrical fouling.

 

No screw, and integrated aluminum foot, tin plated, solderable

 

For More Information Click the Icons Below
click for PDF document
click for PDF document


NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

4 AWG High AMP PCB Wire Lug 4-16 AWG

Purchase
B4A-PCB-45

4 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 4-16*
(16-1.5mm2)

85A

(75°C)

Optional Slotted Screw

SMT Solderable Surface Mount

B4A-PCB-45, 4AWG - 14AWG

dimensions diagram

Dimensions

A: 0.53" (13.5mm)

B: 0.50" (12.7mm)

C: 0.38" (9.7mm)

See Mechanical Drawing for detailed dimensions

B4A-PCB-45: 4 AWG PCB wire lug, 4-16* AWG, 85 AMP, slotted setscrew,Top wire, and screw entrance optional based on application position.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.  

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 1: Most Sturdy: Vertical screw and horizontal wire.

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.


*16 AWG or fine stranded wires recommend to use wire ferrules.

 

Zinc plated steel screw, and integrated aluminum foot, tin plated, solderable.

 

B4A-PCB-45, 4AWG - 14AWGB4A-PCB-45, 4AWG - 14AWGB4A-PCB-45, 4AWG - 14AWGB4A-PCB-45-HEX, 4AWG - 14AWG

For More Information Click the Icons Below
click for PDF document
click for PDF document


NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

4 AWG High AMP PCB Wire Lug 4-16 AWG

Purchase
B4A-PCB-45-HEX

4 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 4-16*
(16-1.5mm2)

85A

(75°C)

Optional 1/8" HEX Socket Screw

SMT Solderable Surface Mount

B4A-PCB-45-HEX, 4AWG-14AWG

dimensions diagram

Dimensions

A: 0.53" (13.5mm)

B: 0.50" (12.7mm)

C: 0.38" (9.7mm)

See Mechanical Drawing for detailed dimensions

B4A-PCB-45-HEX: 4 AWG PCB wire lug, 4-16* AWG, 85 AMP, slotted setscrew,Top wire, and screw entrance optional based on application position.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 1: Most Sturdy: Vertical screw and horizontal wire.

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.


*16 AWG or fine stranded wires recommend to use wire ferrules.

 

Zinc plated steel screw, and integrated aluminum foot, tin plated, solderable.

 

B4A-PCB-45-HEX, 4AWG-14AWGB4A-PCB-45-HEX, 4AWG-14AWGB4A-PCB-45-HEX, 4AWG-14AWGB4A-PCB-45-HEX, 4AWG - 14AWG

For More Information Click the Icons Below
click for PDF document
click for PDF document


NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

4 AWG High AMP PCB Wire Lug 4-16 AWG

Purchase
B4A-PCB-45-RS

4 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 4-16*
(16-1.5mm2)

85A

(75°C)

Optional #2 Slotted & Robertson Recess Head

SMT Solderable Surface Mount

B4A-PCB-45-RS, 4AWG-16AWG

dimensions diagram

Dimensions

A: 0.53" (13.5mm)

B: 0.50" (12.7mm)

C: 0.38" (9.7mm)

See Mechanical Drawing for detailed dimensions

B4A-PCB-45-RS: 4 AWG PCB wire lug, 4-16* AWG, 85 AMP, Slotted robertson recess screw,Top wire, and screw entrance optional based on application position.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.  

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 1: Most Sturdy: Vertical screw and horizontal wire.

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.


*16 AWG or fine stranded wires recommend to use wire ferrules.

 

Zinc plated steel screw, and integrated aluminum foot, tin plated, solderable

 

B4A-PCB-45-RS, 4AWG-16AWGB4A-PCB-45-RS, 4AWG-16AWGB4A-PCB-45-RS, 4AWG-16AWGB4A-PCB-45-RS, 4AWG-16AWGB4A-PCB-45-HEX, 4AWG - 14AWG

For More Information Click the Icons Below
click for PDF document
click for PDF document


NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

4 AWG High AMP PCB Wire Lug 4-16 AWG

Purchase
B4A-PCB-45-RLM KIT

4 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com


AWG 4-16
(16-1.5mm2)

85A

(75°C)

Top HEX Cap screw 1/4"-28 UNF & Washer

SMT Solderable Surface Mount

B4A-PCB-45-RLM, 4AWG - 16AWG

2 B4A-PCB-45-RLM-KIT with ring lug

195A with two B4A-PCB-45-RLM. Ring Lug not included.

rlm with 2 wrenches
When tightening bolt,
two wrenches should be used to avoid damaging smt bond

dimensions diagram

Dimensions

A: 0.53" (13.5mm)

B: 0.50" (12.7mm)

C: 0.38" (9.7mm)

See Mechanical Drawing for detailed dimensions

B4A-PCB-45-RLM-KIT: 4 AWG PCB wire lug, 4-16 AWG, 85 AMP, Hex cap screw, and washer. Wire and screw entrance optional based on application position. Ring lug not included.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.  

 

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

 

B12-NM-SMT orientations

Figure 1: Most Sturdy: Vertical screw and horizontal wire.

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.

In Figure 2 and 3 orientation, when using a headed screw or ring lug and bolt it's recommended that the head of the screw hangs off the edge of the board. Screws with little or no clearance between the head of the screw and the board can result in mechanical and electrical fouling.

 

Zinc plated steel screw, and integrated aluminum foot, tin plated, solderable

B4A-PCB-45-RLM on circuit board  B4A-PCB-45-RLM on circuit board  B4A-PCB-45-RLM on circuit board  B4A-PCB-45-RLM on circuit board  B4A-PCB-45-RLM on circuit board

 

B4A-PCB-45-RLM in use with ring lugs and soldered to boards. Ring Lugs not included. (SMT application).

For More Information Click the Icons Below
click for PDF document
click for PDF document


NO UL, UR

RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.
 
Return to Top
Part No.

2 AWG High AMP PCB Wire Lug 2-14 AWG

Purchase
B2A-PCB-SMT

2 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG (2)3 -14
(25-2.5mm2)

(115A) 100A

(AL7CU)

SIDE /
TOP
.051" Slotted Screw

SMT Solderable Surface Mount

B2A-PCB-SURFACE-MOUNT-TECH, 2AWG - 14AWG

dimensions diagram

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

D: 0.91" (23.1mm)

See Mechanical Drawing for detailed dimensions

B2A-PCB-SMT: 2 AWG PCB wire lug, (2)3-14 AWG, 115A/100A AMP, slotted set screw. Side wire, and top screw entrance. UL Recognized at 600v - acceptable for use through 2000v. Canada Certified. IHI Connectors® brand.

 

Temperature Range and Rating Guide

 

90C (AL9CU) version available.

 

One piece SMT / SMD Solderable Body Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

 

Precautions when using SMT and SMT FAQ

Zinc plated steel screw, and tin plated copper staple, solderable

 

 

 

For More Information Click the Icons Below
click for PDF document
click for PDF document


Rated Torque Label

CSA Logo
UL CSA Certificate Link

RoHS 10/10

 
Return to Top
Part No.

2 AWG High AMP PCB Wire Lug 2-14 AWG

Purchase
B2A-PCB-SMT-HEX

2 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG (2)3 -14
(25-2.5mm2)

(115A) 100A

(AL7CU)

SIDE /
TOP
5/32" (4mm) Hex Socket
Screw

SMT Solderable Surface Mount

B2A-PCB-SURFACE-MOUNT-TECH-Hex-Socket-Screw, 2AWG - 14AWG

dimensions diagram

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

D: 0.91" (23.1mm)

See Mechanical Drawing for detailed dimensions

B2A-PCB-SMT-HEX: 2 AWG PCB wire lug, (2)3-14 AWG, 115A/100A AMP, HEX socket screw. Side wire, and top screw entrance. UL Recognized at 600v - acceptable for use through 2000v. Canada Certified. IHI Connectors® brand.

 

Temperature Range and Rating Guide

 

90C (AL9CU) version available.

 

SMT / SMD Solderable Body Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

 

Precautions when using SMT and SMT FAQ

Zinc plated steel screw, and tin plated copper staple, solderable

 

 

For More Information Click the Icons Below
click for PDF document
click for PDF document


Rated Torque Label

CSA Logo
UL CSA Certificate Link

RoHS 10/10

 
Return to Top
Part No.

2 AWG High AMP PCB Wire Lug 2-14 AWG

Purchase
B2A-PCB-SMT-SS

2 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG (2)3 -14
(25-2.5mm2)

(115A) 100A

(AL7CU)

SIDE /
TOP
.051" Stainless Steel Screw

SMT Solderable Surface Mount

B2A-PCB-SURFACE-MOUNT-TECH-STAINLESS-STEEL-SCREW, 2AWG - 14AWG

dimensions diagram

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

D: 0.91" (23.1mm)

See Mechanical Drawing for detailed dimensions

B2A-PCB-SMT-SS: 2 AWG PCB wire lug, (2)3-14 AWG, 115A/100A AMP, stainless steel screw. Side wire, and top screw entrance. UL Recognized at 600v - acceptable for use through 2000v. Canada Certified. IHI Connectors® brand.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

 

Precautions when using SMT and SMT FAQ

Zinc plated steel screw, and tin plated copper staple, solderable

 

 

For More Information Click the Icons Below
click for PDF document
click for PDF document


Rated Torque Label

CSA Logo
UL CSA Certificate Link

RoHS 10/10

 
Return to Top
Part No.

2 AWG High AMP PCB Wire Lug 2-14 AWG

Purchase
B2C-PCB-SMT

2 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com


AWG 2 -14
(25-2.5mm2)

115A

(AL7CU)

SIDE /
TOP
.051" Slotted Screw

SMT Solderable Surface Mount

B2C-PCB-SURFACE-MOUNT-TECH, 2AWG - 14AWG

dimensions diagram

Dimensions

A: 0.47" (10.7mm)

B: 0.66" (14.2mm)

C: 0.41" (10.4mm)

D: 0.91" (23.1mm)

See Mechanical Drawing for detailed dimensions

B2C-PCB-SMT: 2 AWG PCB wire lug, 2-14 AWG, 115A AMP, Slotted set screws. Side wire, and top screw entrance UL Recognized at 600v - acceptable for use through 2000v. Canada Certified. IHI Connectors® brand.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

 

Precautions when using SMT and SMT FAQ

Zinc plated steel screw, and tin plated copper staple, solderable

 

 

For More Information Click the Icons Below
click for PDF document
click for PDF document


Rated Torque Label

CSA Logo
UL CSA Certificate Link

RoHS 10/10

 
Return to Top
Part No.

2 AWG High AMP PCB Wire Lug 2-14 AWG

Purchase
B2C-PCB-SMT-HEX

2 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com


AWG 2 -14
(25-2.5mm2)

115A

(AL7CU)

SIDE /
TOP
5/32" (4mm) Hex Socket
Screw

SMT Solderable Surface Mount

B2C-PCB-SURFACE-MOUNT-TECH-HEX-SOCKET-SCREW, 2AWG - 14AWG

dimensions diagram

Dimensions

A: 0.47" (10.7mm)

B: 0.66" (14.2mm)

C: 0.41" (10.4mm)

D: 0.91" (23.1mm)

See Mechanical Drawing for detailed dimensions

B2C-PCB-SMT-HEX: 2 AWG PCB wire lug, 2-14 AWG, 115A AMP, HEX socket screws. Side wire, and top screw entrance. UL Recognized at 600v - acceptable for use through 2000v. Canada Certified. IHI Connectors® brand.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

 

Precautions when using SMT and SMT FAQ

Zinc plated steel screw, and tin plated copper staple, solderable

 

 

For More Information Click the Icons Below
click for PDF document
click for PDF document


Rated Torque Label

CSA Logo
UL CSA Certificate Link

RoHS 10/10

 
Return to Top
Part No.

2 AWG High AMP PCB Wire Lug 2-14 AWG

Purchase
B2C-PCB-SMT-SS

2 AWG Lug

Wire Range Max. Current (Copper Wire) Wire / Screw Access Screw / Drive Head Mounting Style

 

 

 

Purchase via an
Authorized Distributor:

 

To inquire about bulk factory-direct pricing: sales@ihiconnectors.com

AWG 2 -14
(25-2.5mm2)

115A

(AL7CU)

SIDE /
TOP
.051" Stainless Steel Screw

SMT Solderable Surface Mount

B2C-PCB-SURFACE-MOUNT-TECH-STAINLESS-STEEL-SCREW, 2AWG - 14AWG

dimensions diagram

Dimensions

A: 0.47" (10.7mm)

B: 0.66" (14.2mm)

C: 0.41" (10.4mm)

D: 0.91" (23.1mm)

See Mechanical Drawing for detailed dimensions

B2C-PCB-SMT-SS: 2 AWG PCB wire lug, 2-14 AWG, 115A AMP, Stainless Steel Slotted screws. Side wire, and top screw entrance. UL Recognized at 600v - acceptable for use through 2000v. Canada Certified. IHI Connectors® brand.

 

Temperature Range and Rating Guide

 

One piece SMT / SMD Solderable Body Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

 

Precautions when using SMT and SMT FAQ

Zinc plated steel screw, and tin plated copper staple, solderable

 

 

For More Information Click the Icons Below
click for PDF document
click for PDF document


Rated Torque Label

CSA Logo
UL CSA Certificate Link

RoHS 10/10

 
Return to Top
 

 

Copyright © 2007-2024 IHI Connectors®, Ohio - All Rights Reserved
The IHI linked logo, IHI Connectors and IHIConnectors.com are registered trademarks of International Hydraulics Incorporated. WWW.LugsDirect.com is owned and operated by Advancement International Ltd.

CAGE / NCAGE Number 7RPR4